Fire Alarm Systems Book

Fire protection ဘာသာရပ္ကုိ ေလ့လာသည့္အခါ အထူးသျဖင့္ fire alarm system ကုိ ေလ့လာသည့္အခါ အသုံးျပဳမည့္ code မ်ား အထူးဦးစားေပး ေလ့လာသင့္သည္။

Air con ပညာရပ္တြင္ လူသားမ်ားအားလုံးသည္ 22°C ႏွင့္ 24°C အၾကားတြင္ သက္ေတာင့္သက္သာ ေနထုိင္ႏုိင္ ၾကသည္ဟု ႏုိင္ငံအားလုံးက လက္ခံထားၾကေသာ္လည္း fire alarm system ဒီဇုိင္းလုပ္သည့္အခါ မီးေဘးအႏၲရာယ္ အမိ်ဳးအစား၊ အဆင့္စသည္တုိ႔ တစ္ႏုိင္ငံႏွင့္ တစ္ႏုိင္ငံ သတ္မွတ္ပုံ လုံးဝမတူညီၾကေပ။

ျမန္မာနုိင္ငံတြင္ ကုိယ္ပုိင္ Code of Pratice(CP) သုိ႔မဟုတ္ regulation မ်ား အျပည္အစံု မရိွေသးေသာေၾကာင့္ တျခားႏုိင္ငံမွ စည္းမ်ဥ္းစည္းကမ္းမ်ားကုိ မီွျငမ္းၾကသည္။ အေမရိကန္ႏုိင္ငံ (ေျမာက္ အေမရိကတုိက္)တြင္ NFPA ၊ အဂၤလန္ႏုိင္ငံမွ British Standard (BS)၊ စင္ကာပူႏုိင္ငံမွ Singapore Standard (SS) သုိ႔မဟုတ္ Code of Practice(CP) စသျဖင့္ ႏုိင္ငံကုိ လုိက္၍ အသီးသီးကဲြျပားၾကသည္။ ထုိ႔ေၾကာင့္ စည္းမ်ဥ္းစည္းကမ္း တစ္ခုကို အသုံးျပဳသည့္ႏုိင္ငံ၊ ျပဌာန္းသည့္ ႏုိင္ငံ ႏွင့္တကြ တဲြ၍ မွတ္သားရန္၊ ေရးသား ေဖာ္ျပရန္ လုိအပ္သည္။

ေလ့လာဖတ္ရႈသည့္အခါ၌လည္း လက္ရိွဖတ္ေနသည့္အခန္း သို႔မဟုတ္ စာပုိဒ္သည္ မည္သည့္ႏုိင္ငံမွ ျပဌာန္းခ်က္ကို ကုိးကားထားသည္ ရည္ညႊန္းထားသည္ကုိ ဦးစြာ ဆန္းစစ္ေစလုိပါသည္။ ဆန္းစစ္ရန္ လိုအပ္သည္။ ထုိ႔ေၾကာင့္ ဤစာအုပ္တြင္ အခန္းမ်ား၊ စာပုိဒ္မ်ား၌ မည္သည့္ျပဌာန္းခ်က္ မည္သည့္ code ျဖစ္သည္ကို အၿမဲေဖာ္ျပထားသည္။
 အပိုင္း(၆) ပိုင္းခြဲ၍ အခန္းဖြဲ႔ ေရးသားထားသည္။

အပိုင္း(၁)

Fire Alarm Systems Chapter 1(To download PDF File)

Fire Alarm Systems Chapter 2(To download PDF File)

Fire Alarm Systems Chapter 3(To download PDF File)

 

အပိုင္း(၂)

Fire Alarm Systems Chapter 4(To download PDF File)

Fire_Engineering.pdf

 

အပိုင္း(၃)

Chapter-6 Fire_Alarm_Systems_Detectors-MCallPoints.pdf

Chapter-7 Fire_Alarm_Systems_Detectors-Heat.pdf

Chapter-8 Fire_Alarm_Systems_Detectors-Smoke.pdf

Chapter-9 Fire_Alarm_Systems_Flame Detectors and Others Detector

အပိုင္း(၄)

Chapter-10 Alarm Notification device.pdf

 

အပိုင္း(၅)

Chapter-11 Fire Alarm Control Panel

Chapter 12– Emergency Communications Systems (ECS)

Conventional_And_Addressable_Fire_Alarm_Systems.pdf

Circuit and Wiring

Installation


အပိုင္း(၆)

Maintaining_Fire_Alarm_System_Reliability.pdf

CP-10:2005 (Can be downloaded in 2 to 3 weeks time)

Chapter 15 – Periodic Inspection, Testing, Service, and Maintenance

 

Chapter - 1 Fire Alarm System

Contents

Chapter - 1 Fire Alarm System.. 1

Basic Fire Alam Systems Overview.. 2

Selecting a Fire Alarm System for your Application. 3

Life Safety Protection. 4

Property Protection. 5

Mission Protection. 6

Heritage Protection. 6

Application Guidelines. 7

Time considerations. 7

Detector Selection. 7

Ceiling Height 8

Detector Spacing. 8

 

 

Basic Fire Alam Systems Overview

            အသက္ အႏၲရာယ္ ကာကြယ္ရန္ (protection of life) ႏွင့္ ဥစၥာ ပစၥည္းမ်ားကို ကာကြယ္ရန္ (protection of property) အတြက္ fire alarm system မ်ားကို တပ္ဆင္ၾကသည္။ Fire alarm system တစ္ခုသည္အထိ ေရာက္ဆုံးကာကြယ္မႈ ေပးႏိုင္ရန္အတြက္ ေအာက္ပါ  လုပ္ငန္း(function) မ်ားကို ေဆာင္ရြက္ေပးႏိုင္ရမည္။

(၁)

မီးစတင္ေလာင္ကြ်မ္းသည့္အခါ ခ်က္ခ်င္းသိႏိုင္ရမည္။ (Detect the presence of a fire.)

(၂)

အေဆာက္အဦအတြင္းရွိေနသူမ်ားကို အသိေပးႏိုင္ရမည္။ (Notify the occupants)

(၃)

မီးသတ္ဌာနသို႔ အေၾကာင္းၾကားေပးႏိုင္ရမည္။ (Notify the fire department (usually through a central station connec-tion))

(၄)

မီးေဘးအႏၲရာယ္ကင္းေဝးေစေရးလုပ္ငန္းမ်ားျဖစ္ေသာ တံခါးမ်ားဖြင့္ေပးျခင္း (door release)၊ smoke door မ်ား ဖြင့္ေပးျခင္း စသည္တို႔ ေဆာင္ရြက္ေပးႏိုင္ရမည္။ (Operate other fire safety functions, e.g., release magnetically held open smoke doors.)

            Heat detector မ်ားႏွင့္ smoke detector မ်ားသည္ အသုံးမ်ားသည့္ fire detection devices မ်ား ျဖစ္ၾကသည္။ Heat detector သည္ မီးေလာင္ျခင္းေၾကာင့္ျဖစ္ေပၚလာမည့္ အပူ (heat) ကို detect လုပ္ရန္ သို႔မဟုတ္ မီးေလာင္ျခင္းေၾကာင့္ detector အနီးတြင္ အပူခ်ိန္ ႐ုတ္တရက္ ျမင့္တက္လာျခင္း(rapid increase of temperature) ကို သိႏိုင္ (detect) ရန္အတြက္ ဒီဇိုင္းလုပ္ထားသည့္ ကိရိယာျဖစ္ သည္။

            Smoke detector မ်ားသည္ မီးေလာင္ျခင္းေၾကာင့္ ျဖစ္ေပၚလာမည့္ မီးခိုး (smoke) မ်ားကို သိႏိုင္ရန္ ဒီဇိုင္းလုပ္ထားသည့္ ကိရိ ယာ ျဖစ္သည္။ တပ္ဆင္ထားသည့္ ေနရာအနီးတြင္ မီးခိုးမ်ားျဖစ္ေပၚလာပါက သို႔မဟုတ္ ေရာက္လာပါက သိရွိႏိုင္ေအာင္ (detect) ဒီဇိုင္း လုပ္ထားသည့္ ကိရိယာျဖစ္သည္။

            အသုံးမ်ားသည့္ (common types) smoke detector ႏွစ္မ်ဳိးမွာ ionization ႏွင့္ photoelectric အမ်ဳိးအစားတို႔ျဖစ္ၾကသည္။ သင့္ေလ်ာ္သည့္ detector ကို ေရြးခ်ယ္ရန္ အလြန္အေရးႀကီးသည္။ Ionization detector မ်ားသည္ flaming fire faster ကို လ်င္ျမန္စြာ သိႏိုင္ (detect) သည္။ Photoelectric detector သည္ smoldering fire quicker လ်င္ျမန္စြာ သိႏိုင္သည္။

            ေယဘုယ်အားျဖင့္ manual fire alarm boxe မ်ားကို အေဆာက္အဦ၏ အထပ္တိုင္းရွိ လူထြက္ေပါက္မ်ား (exits) အားလုံးတြင္ တပ္ဆင္ထားသည္။ အေဆာက္အဦတြင္ automatic sprinkler system တပ္ဆင္ထားလ်ွင္ မီးေလာင္ေနေၾကာင္း သိႏိုင္ရန္အတြက္ waterflow device မ်ားကို အသုံးျပဳသည္။

            Heat detector၊ smoke detector စသည့္ automatic detection devices မ်ားကို ေရြးခ်ယ္ရာတြင္ detect လုပ္ႏိုင္သည့္ အက်ယ္ (level of coverage) ကို သတိျပဳေရြးခ်ယ္ရန္ လိုအပ္သည္။ အခန္းအတြင္း သို႔မဟုတ္ အေဆာက္အဦအတြင္း detector မ်ား တပ္ ဆင္႐ုံျဖင့္ မီးေလာင္လ်ွင္ ႀကိဳသိလိမ့္မည့္ မွားယြင္းစြာ ယူဆတတ္ၾကသည္။ မီးစတင္ေလာင္သည့္ ေနရာသည္ smoke detector သို႔မဟုတ္ heat detect အလွမ္းမမီသည့္ေနရာ ျဖစ္ေနပါက သိႏိုင္ (detect) လိမ့္မည္ မဟုတ္ေပ။ တစ္နည္းအားျဖင့္ detect မလုပ္ႏိုင္သည့္ေနရာတြင္ မီးစတင္ေလာင္ကြ်မ္းပါက မသိႏိုင္ပါ။ ထို႔ေၾကာင့္ ကာကြယ္လိုသည့္ေနရာအားလုံးကို ျခံဳငုံမိေအာင္ smoke detector ႏွင့္ heat detect မ်ား ကို တပ္ဆင္ထားရန္ လိုအပ္သည္။

ပုံ ၁ - ၁ Typical Fire Alarm System

            Sprinkler မ်ား တပ္ဆင္ထားသည့္ေနရာတြင္ automatic fire detector မ်ား တပ္ဆင္ထားရန္ မလိုဟု ယူဆတတ္ၾကသည္။ မီးေလာင္ေနေၾကာင္း အထိေရာက္ဆုံး ႀကိဳတင္သိႏိုင္ရန္(effectively detect) အတြက္ ေနရာမလပ္ တပ္ဆင္ထားရန္ လိုသည္။ တခ်ဳိ႕ ေနရာမ်ားတြင္ property protection or mission protection ရန္အတြက္ complete automatic sprinkler system တပ္ဆင္ထားရန္ ပိုင္ရွင္မ်ားက ေရြးခ်ယ္တတ္ၾကသည္။ အေကာင္းဆုံးႏွင့္ စိတ္အခ်ရဆုံးနည္းမွာ အေဆာက္အဦ အတြင္းရွိေနသူမ်ား သိႏိုင္ေစရန္၊ လိုအပ္သည့္ ျပင္ဆင္မႈမ်ား ျပဳလုပ္ႏိုင္ရန္ အတြက္ automatic sprinkle system ႏွင့္ fire alarm system တို႔ကို အတူတကြ တပ္ဆင္ထားျခင္း ျဖစ္သည္။

            အေဆာက္အဦအတြင္းရွိေနသူမ်ား မီးေလာင္ေနေၾကာင္းသိႏိုင္ရန္(Notifying the occupants) ႏွင့္ ေဘးကင္းရာသို႔ လြတ္ေျမာက္ ရန္ (emergency evacuation) အတြက္ က်ယ္ေလာင္သည့္အသံ ေၾကညာေပးရမည္။ Horns ၊ bells ၊ sirens ၊ stroboscopic lights ၊ speakers စသည္ notifying appliance မ်ားကို သတိေပးရန္ သို႔မဟုတ္ အသိေပးရန္အတြက္ အမ်ားဆုံး အသုံးျပဳၾကသည္။ ထိုပစၥည္း(notifying appliance) မ်ားသည္ detection ကိရိယာမ်ားကဲ့သို႔ပင္ အေရးႀကီးသည့္ ပစၥည္းမ်ားျဖစ္သည္။ Notifying appliance မ်ားကို စနစ္တက် ေနရာခ်ထားရန္ လိုအပ္သည္။ အေဆာက္အဦအတြင္း ေနရာအႏွံ႔အျပားမွ ၾကားႏိုင္ေအာင္ speaker မ်ား တပ္ဆင္ထားမည့္ ေနရာမ်ား ကို စနစ္တက် ေရြးခ်ယ္သင့္သည္။

            မီးသတ္ဌာန (fire department) မ်ားသို႔ အလိုအေလ်ာက္ အေၾကာင္းၾကားျခင္း (automatically notifying) ျပဳလုပ္သည့္နည္းမ်ားကို သုံးရမည္။ မီးေလာင္ပ်က္စီးမႈ ေလ်ာ့နည္းေစရန္ ေစာႏိုင္သမွ် အေစာဆုံး အေၾကာင္းၾကား သင့္သည္။ မီးမႀကီးထြားခင္ ႀကိဳသိျခင္း၊ အေစာဆုံး အေၾကာင္းၾကားႏိုင္ျခင္းတို႔ေၾကာင့္ အလြယ္တကူ မီးၿငိမ္းသတ္ ႏိုင္သည္။ မီးမျပန္႔ပြားေအာင္ ထိန္းခ်ဳပ္ႏိုင္သည္။ ဤအခ်က္မ်ား သည္ fire alarm system ဒီဇိုင္း၏ ပန္းတိုင္ျဖစ္သည္။

            Fire alarm system တပ္ဆင္ျခင္းလုပ္ငန္းမ်ားအတြက္ National Fire Alarm and Signaling Code, NFPA 72 ႏွင့္ National Electrical Code, NFPA 70 တို႔ကို လိုက္နာရန္ လိုအပ္သည္။ Fire alarm system အမ်ဳိးအစား အားလုံးအတြက္ အက်ဳံးဝင္သည္။ သက္ဆိုင္သည့္ စည္းမ်ဥ္းစည္းကမ္း(applicable codes)ကို ေလ့လာသိရွိၿပီး လိုက္နာရန္ အထူးလိုအပ္သည္။

            System မ်ား အားလုံးသည္ NFPA 72 ၏ လိုအပ္ခ်က္မ်ားကို လိုက္နာရမည္။ NFPA 72- Fire Alarm and Signaling Code 2010 သည္ လက္ရွိအသုံးျပဳေနသည့္ code ျဖစ္သည္။ 2010 code တြင္ အခန္းေပါင္း(၂၉)ခန္း ပါဝင္သည္။ NFPA 72 ကို National Fire Alarm and Signaling Code ဟူ၍လည္း ေခၚဆိုေလ့ရွိသည္။

Selecting a Fire Alarm System for your Application

            စည္းမ်ဥ္းစည္းကမ္း (code) အရ တပ္ဆင္ရန္ လိုအပ္သည္ျဖစ္ေစ၊ မလိုအပ္သည္ျဖစ္ေစ အေဆာက္အဦတြင္ fire alarm system တစ္ခုကို တပ္ဆင္ရန္ ဆုံးျဖတ္ခ်က္ခ်ၿပီးေနာက္ မည္ကဲ့သို႔မ်ဳိး system ကို တပ္ဆင္ရမည္။ မည္ကဲ့သို႔ေသာ equipment မ်ားကိုအသုံးျပဳရ မည္ စသည္တို႔ကို သတ္မွတ္ရန္ လိုအပ္သည္။

            ဥပေဒအရ တပ္ဆင္ရန္ လိုအပ္သည္ျဖစ္စ၊ မိမိဆႏၵအရ တပ္ဆင္သည္ျဖစ္ေစ စည္းမ်ဥ္းစည္းကမ္း(code) မ်ား အတိုင္း တပ္ဆင္ ျခင္းသည္ စိတ္အခ်ရဆုံးနည္းျဖစ္သည္။

            Fire alarm system ဒီဇိုင္းတစ္ခုကို ေရြးခ်ယ္ရာတြင္ ေအာက္ပါအခ်က္မ်ားကို အေလးေပးစဥ္းစားသင့္သည္။

(က)

System ၏ ရည္ရြယ္ခ်က္ (purpose of the system)

(ခ)

အေဆာက္အဦပိုင္ရွင္၏ မီးေဘးကာကြယ္ေရး ဦးတည္ခ်က္မ်ား (fire protection goals of the owner)

(ဂ)

ကာကြယ္ေပးရမည့္ အေဆာက္အဦအတြင္းရွိေနသူ အမ်ဳိးအစားမ်ား (type of occupancy to be protected)

(ဃ)

The type and quantity of the contents to be protected

(င)

The required response time of the system; i. e. how fast must it operate? (System က တုံ႔ျပန္ရမည့္အခ်ိန္ လိုအပ္ ခ်က္) အခ်ိန္မည္မွ်အတြင္း တုံ႔ျပန္ရမည္ကို ေဖာ္ျပေပးရမည္။

(စ)

System ၏ အေျခခံလုပ္ငန္းမ်ား (basic function of the system)

(ဆ)

လိုက္နာရမည့္ စည္းမ်ဥ္းစည္းကမ္းႏွင့္ စံမ်ား (applicable fire alarm system codes and standards)

(ဇ)

တျခားေသာ မီးေဘးကာကြယ္ေရးစနစ္မ်ားႏွင့္ ေပါင္းစည္းရန္ (other fire protection systems that must be interfaced)

(စ်)

မီးသတ္ဌာနမွ ေရာက္ရွိႏိုင္မည့္အခ်ိန္ (The response time of the fire department) ႏွင့္

(ည)

ေရရရွိႏိုင္မႈ (available water supply) တို႔ျဖစ္သည္။

 

Fire alarm system ၏ အဓိက ရည္ရြယ္ခ်က္သည္ အေဆာက္အဦအတြင္းရွိေနသူမ်ား (occupants) ႏွင့္ မီးသတ္ဌာန (fire department) မ်ားသို႔ မီးေလာင္ေနေၾကာင္းကို အသိေပးရန္ ျဖစ္သည္။ အေဆာက္အဦတြင္ မီးစတင္ေလာင္သည့္အခါ မီးၿငိမ္းသတ္ႏိုင္သည့္ စနစ္ (suppression system) မ်ား စတင္အလုပ္လုပ္ရန္၊ စက္မ်ားရပ္တန္႔ရန္ (shut down equipment) ရန္၊ manufacturing processes ရပ္တန္႔ရန္လိုအပ္သည္။ The building and fire codes ႏွင့္ NFPA Life Safety Code® NFPA 101-2009 edition တို႔မွ minimum fire alarm system requirements ႏွင့္ guidance for the occupancy classification of the building တို႔ကို ေဖာ္ျပေပးသည္။

            Fire alarm system ဒီဇိုင္းမလုပ္ခင္ အေဆာက္အဦ အမ်ဳိးအစား၊ အသုံးျပဳပုံ၊ ေလာင္ႏိုင္သည့္ မီးအမ်ဳိးအစား စသည္တို႔ကို ေလ့လာဆန္း စစ္ရန္ လိုအပ္သည္။ Frie alarm system ဒီဇိုင္နာမ်ားႏွင့္ ႏွီးေႏွာတိုင္ပသင့္သည္။ အေဆာက္အဦ ပိုင္ရွင္မ်ားသည္ မီးေဘးကာကြယ္ရန္၊ အသက္မဆုံး႐ႈံးေစရန္ မရည္မွန္းဘဲ ျဖစ္မေနတပ္ဆင္ရန္ ၫႊန္ၾကားခ်က္မ်ားကို လိုက္နာရန္အတြက္သာ တပ္ဆင္ၾကသည္။ applicable codes ႏွင့္ standards တို႔ႏွင့္ ကိုက္ညီ႐ုံျဖင့္ မီးေဘးကာကြယ္ေရး ပန္းတိုင္မ်ား (fire protection goals) ရရွိလိမ့္မည္ မဟုတ္ေပ။

            ဒီဇိုင္နာမ်ားႏွင့္ ကန္ထ႐ိုက္တာမ်ားသည္ NFPA 72, the National Fire Alarm and Signaling Code ® တြင္ လိုအပ္သည္ဟု မေဖာ္ျပ ထားသည့္ အရာမ်ားကို တပ္ဆင္ေလ့မရွိၾကေပ။

            Building and fire codes မ်ားသည္ မီးေလာင္ၿပီးေနာက္ အေဆာက္အဦ က်န္ရစ္ေစရန္ သို႔မဟုတ္ မီးမသင့္ေစရန္ ျပင္ဆင္ျပဳစုထားသည့္ စည္းမ်ဥ္းမ်ားမဟုတ္ပါ။ တစ္ခါတစ္ရံ ပိုင္ရွင္မ်ား ေမွ်ာ္လင့္ထားသည့္ ကာကြယ္မႈမ်ဳိးထက္ ေလ်ာ့နည္းေနသည္။ ပညာရွင္မ်ားက ပိုင္ရွင္မ်ားကို fire alarm system ၏ ကာကြယ္ေပးႏိုင္ပုံႏွင့္ အထိေရာက္ဆုံး အသုံးျပဳႏိုင္ရန္ ရွင္းျပကာ လိုက္ေလ်ာ ခြင့္ျပဳေစရန္ ႏွစ္သိမ့္သင့္သည္။ ေယဘုယ်အားျဖင့္ frie protection goals မ်ားမွာ ေအာက္ပါတို႔အနက္မွ တစ္ခု သို႔မဟုတ္ အခ်က္အားလုံးျဖစ္ႏိုင္သည္။

(က)

Life Safety

(ခ)

Property Protection

(ဂ)

Mission Protection ႏွင့္

(ဃ)

Heritage protection တုိ႔ျဖစ္သည္။

Life Safety Protection

            အိမ္ခန္းမ်ား(apartments)၊ ဟိုတည္မ်ား(hotels)၊ ကြန္ဒိုမီနီယံမ်ား(condominiums) စသည့္ လူေနအိမ္မ်ား (residential)မ်ားတြင္ တပ္ဆင္မည့္ fire alarm system မ်ားကို အသက္ေဘးမွ ကာကြယ္မႈမ်ား(life safety protection) ထိေရာက္ေစရန္ ဒီဇိုင္းလုပ္သည္။ အေဆာက္ အဦ အတြင္း ရွိေနသူမ်ား(occupants) ၏ အသက္ေဘးမွ ကာကြယ္ေပးႏိုင္မႈ(life safety) ဆိုသည့္ အဓိပၸာယ္ကို မီးေလာင္ေနေၾကာင္း ႀကိဳတင္ အသိေပးျခင္း(early warning) ဟု အဓိပၸာယ္ ဖြင့္ဆိုႏိုင္သည္။

            Fire alarm system သည္ ေကာင္းစြာ ကာကြယ္ေပးႏိုင္႐ုံသာမက တည္ၿငိမ္သည့္ system ျဖစ္ရန္ လိုအပ္သည္။ Fire alarm system သည္ life safety protection ျဖစ္ေစရမည္။ ယုံၾကည္စိတ္ခ်(reliability) ျမင့္မား ရမည္။ တည္ၿငိမ္(stable)ရမည္။ အေဆာက္အဦအတြင္းရွိေနသူ မ်ား(occupants) ၏ စိတ္ထဲတြင္ လုံျခံဳမႈ ေပးႏိုင္စြမ္းရွိသည္ဟု ထင္ျမင္ႏိုင္စြမ္းရွိေစရမည္။

            တျခားေသာ အေရးႀကီးသည့္ အခ်က္တစ္ခုမွာ "public mode notification" ျဖစ္သည္။ လူမ်ားကို အသိေပးျခင္း(PMN) ဆိုသည္မွာ အေဆာက္အဦအတြင္း၌ မီးေလာင္သည့္အခါ a sound pressure level of 15dBA above the ambient noise level or 5dBA above a maximum sound level lasting for at least 60 seconds တို႔အနက္ ပိုျမင့္သည့္အသံျဖင့္(ပိုက်ယ္သည့္အသံ)ျဖင့္ ေၾကျငာေပးရန္ သို႔မဟုတ္ အသံျမည္ေစရန္ျဖစ္သည္။

            In addition the Life Safety Code-2009 edition and the Americans with Disabilities Act (ADA) လိုအပ္ခ်က္အရ visible appliances be installed to assist in alarm notification of the hearing impaired နားမၾကားႏိုင္သည့္ လူမ်ားအတြက္ ျမင္ႏိုင္သည့္ လ်ွပ္စစ္မီးေရာင္ျဖင့္  မီးေလာင္ေနေၾကာင္း) သိသာေအာင္ အသိေပးသည့္ ကိရိယာမ်ား တပ္ဆင္ထားရမည္။ လူမ်ားေဘးကင္းရာသို႔ ထြက္သြားရန္ အခ်က္ေပးအသံ(FA evacuation signal) သည္ တျခားေသာ အသံမ်ားႏွင့္ မတူေစဘဲ သိသာထင္ရွားသည့္အသံ ျဖစ္ရမည္။ ထိုအသံမ်ဳိးႏွင့္ တူညီသည့္အသံကို မည္သည့္ ေနရာတြင္မွ အသုံးမျပဳရ။

            The temporal three pattern shall only be used if total evacuation of the building is required.

Property Protection

            Detector အေရအတြက္ႏွင့္ အမ်ဳိးအစားကို အေျခခံ၍ fire alarm system အမ်ဳိးအစားကို ေရြးခ်ယ္ ၾကသည္။ ပိုင္ရွင္မ်ား၏ ရည္ရြယ္ခ်က္(owner's property protection goals)၊ အေဆာက္အဦတန္ဖိုး(value of the property) ႏွင့္ ပိုင္ရွင္၀ယ္ယူထားသည့္ မီးအာမခံ(fire insurance)၏ လိုအပ္ခ်က္မ်ားကို မူတည္၍ ေယဘုယ်အားျဖင့္ တန္ဖိုးမမ်ားသည့္ ေနရာမ်ားတြင္ heat detector မ်ားကို အသုံးျပဳၾကသည္။ Fire alarm system ၏ အဓိကတာဝန္သည္ မီးေဘးအႏၲရာယ္မွ ႀကိဳတင္ကာကြယ္ေပးရန္ ျဖစ္သည္။

            မီးအာမခံ(fire insurance) ႏွင့္ ပညာရွင္(fire service professional) မ်ားက ေရြးခ်ယ္ထားသည္ အခန္းအခ်ဳိ႕ႏွင့္ လူသြားလမ္းမ်ားတြင္ sprinkler heads မ်ား တပ္ဆင္ထားသည့္ automatic sprinkler system ကို ေကာင္းစြာ အကာအကြယ္ ေပးႏိုင္သည့္ system အျဖစ္ ယူဆလိမ့္ မည္ မဟုတ္ေပ။ တစ္ဦးတစ္ေယာက္အေနျဖင့္ detector အခ်ဳိ႕ တပ္ဆင္ထားသည့္ fire alarm system ကို ျပည့္စုံသည့္(complete) fire alarm system အျဖစ္ သတ္မွတ္ေကာင္း သတ္မွတ္ႏိုင္သည္။ မီးအာမခံ(fire insurance) ႏွင့္ ပညာရွင္(fire service professional) မ်ားက စိတ္ခ်ရ သည့္ system အျဖစ္သတ္မွတ္လိမ့္မည္ မဟုတ္ေပ။

            အေဆာက္အဦ ကာကြယ္ျခင္း(property protection) ၏ အဓိကတာဝန္မွာ မီးေဘးေၾကာင့္ ျဖစ္ေပၚမည့္ ဆုံး႐ႈံးမႈမ်ားကို ေလ်ာ့နည္းေစ ရန္(reduce property losses due to fire) ျဖစ္သည္။ မည္သည့္ fire alarm system မဆို စိတ္အခ်ရဆုံးႏွင့္ ကာကြယ္မႈ အေကာင္းဆုံးျဖစ္ေစရန္ 100% coverage using automatic detection and be connected to a listed supervising station ျဖစ္ရမည္။ Fire alarm system မ်ားသည္ မီးၿငိမ္းသတ္ေပးႏိုင္သည့္ (suppress the fire) system မ်ား မဟုတ္ၾကေပ။ To be of any use in property protection, the fire alarm system must be able to detect the fire and provide off- premises notification in enough time for the fire department to respond while the fire is still telatively small.

            မ်ားေသာအားျဖင့္ အေဆာက္အဦ ကာကြယ္ျခင္း(property protection) အတြက္ heat detector မ်ားကို အသုံးျပဳၾကသည္။ The type of automatic heat detectors installed၊ fixed temperature၊ rate- of-rise, or rate compensated စသည္တို႔အနက္ မည္သည့္အခါ အသုံးျပဳရမည္။ ambient temperature ႏွင့္ environment in which detection is needed တို႔အေပၚတြင္ မူတည္သည္။

            Other forms of detection, spot type smoke detection၊ beam type smoke detection or flame detection တို႔ကိုလည္း အသုံးျပဳႏိုင္သည္။ မ်က္ႏွာၾကက္အျမင့္(ceiling height)၊ detector မ်ား၏ တုံ႔ျပန္ခ်ိန္ (response time)၊ မီးသတ္ဌာနေရာက္လာႏိုင္မည့္အခ်ိန္(fire department response time) ႏွင့္ ေရရွိႏိုင္မႈ (availability of water) စသည္တို႔ကို ထည့္သြင္းစဥ္းစားရမည္။ Refer to Table on Page 18 for guidance.

Mission Protection

            "Mission protection" ဆိုသည္မွာ ကုမၼဏီတစ္ခု သို႔မဟုတ္ အဖြဲ႕အစည္းတစ္ခုသည္ မီးေလာင္ ကြ်မ္းခံရၿပီးေနာက္ ဆက္လက္ရပ္တည္ လုပ္ကိုင္ေနႏိုင္စြမ္းကို ဆိုလိုသည္။ Another way to look at the protection required in a facility is to determine whether or not each area of the building or an area which houses a certain business function (i.e., receivables computer, special finishing processes, etc.) will be able to withstand the impact of a fier. Then determine if the business function can maintain its operation after the fire. The results of this survey will of

            ten dictate which detection devices will meet the owner's goals. If the area or business function is critical to the mission of the owner, လ်င္ျမန္စြာ detection လုပ္ႏိုင္သည္။ flame detectors or aspirating (active air sampling) စသည့္ smoke detection အမ်ဳိးအစားမ်ားကို အသုံးျပဳရမည္။ မီးေလာင္လ်ွင္ ခ်က္ခ်င္း သိႏိုင္သည့္ smoke detector အမ်ဳိးအစားမ်ား ျဖစ္သည္။

            If the loss of a particular area will have no ap-preciable impact on the ability of a company to conduct business in the future, the slower forms of detection (i.e., heat detection) can be used in that area or space.

Heritage Protection

            သမိုင္းဝင္ ပစၥည္းမ်ား၊ အေဆာက္အဦးမ်ားကို မီးေဘးရန္မွ ကာကြယ္ျခင္းလုပ္ငန္းသည္ ခက္ခဲသည့္ အလုပ္ ျဖစ္သည္။ သမိုင္းဝင္ပစၥည္းမ်ား ေပ်ာက္ပ်က္သြားပါက အစားထိုးရန္ မျဖစ္ႏိုင္ေပ။ အဓိက အခ်က္(၂)ခ်က္ ပါဝင္သည္။ Early detection ႏွင့္ preservation of the historic nature of the facility ျဖစ္သည္။ ျပတိုက္မ်ား၊ သမိုင္းဝင္ပစၥည္းမ်ား ျပသရာ အခန္းမ်ားတြင္ fire alarm system ကို တပ္ဆင္ထားရန္ လိုအပ္ေသာ္လည္း fire alarm system ႏွင့္ သက္ဆိုင္သည့္ ပစၥည္းမ်ားျဖစ္ေသာ smoke detector ၊ heat detector စသည္တို႔ကို ျမင္သာသည့္ ေနရာတြင္ တပ္ဆင္ မထားလိုၾကေပ။

            ထိုအေဆာက္အဦမ်ားသည္ မီးသတ္သမား အလြယ္တကူဝင္ေရာက္ရန္ ခက္ခဲသည္။ မီးေလာင္လြယ္သည့္ ပစၥည္းမ်ားျဖင့္ ျပည့္ေနေသာေၾကာင့္ အလြယ္တကူ မီးပ်ံ႕ႏွံ႔ႏိုင္သည္။ ထို႔ေၾကာင့္ detector မ်ားကို ေနရာတိုင္း ျပည့္ေနေအာင္ တပ္ဆင္ထားရမည္။ တစ္နည္းအားျဖင့္ total detection coverage သို႔မဟုတ္ complete detection coverage system ကို ဆိုလိုသည္။

            အဆုံး႐ႈံး မခံႏိုင္သည့္ ပစၥည္းမ်ားျဖစ္ေသာေၾကာင့္ ႀကိဳသိေအာင္ျပဳလုပ္ထားျခင္း(early detection) သည္ အေကာင္းဆုံး ျဖစ္သည္။ ေယဘုယ်အားျဖင့္ spot-type သို႔မဟုတ္။ linear beam smoke detector မ်ားကို အသုံးျပဳသင့္သည္။ air-sampling (aspirating-style) smoke detector မ်ားသည္လည္း earliest protection ကို ေပးႏိုင္သည္။ Heritage Protection ႏွင့္ သက္ဆိုင္သည့္ အခ်က္မ်ားအတြက္ NFPA 909-2010, Code for the Protection of Cultural Resources Properties- Museums, Libraries, and Places of Worship မ်ားကို ကိုးကား မွီျငမ္း ႏိုင္သည္။

HEAT DETECTORS Table (Page 18)

Application Guidelines

Time considerations

            မီးႏွင့္ သက္ဆိုင္သမွ် အရာအားလုံးတြင္ အခ်ိန္သည္ အဓိက အက်ဆုံးျဖစ္သည္။ Heat detectors, sprinklers, ႏွင့္ many other extinguishing devices or systems မ်ား၏ အဆင့္ကို တံု႔ျပန္ခ်ိန္(response time) ျဖင့္ သတ္မွတ္ၾကသည္။ Fire resistance of building materials ႏွင့္ assemblies မ်ားကိုလည္း မီးဒဏ္ခံႏိုင္သည့္ အခ်ိန္ျဖင့္ အဆင့္အတန္း သတ္မွတ္ၾကသည္။ (The evacuation needs of the occupants are also measured in terms of time.) အေဆာက္အဦ အတြင္းရွိေနသူမ်ား၏ လြတ္ေျမာက္ရန္နည္း၊ လြတ္ေျမာက္ရာသို႔ေရာက္ရန္ အခ်ိန္ကို လိုက္၍ အဆင့္အတန္း ခြဲျခားၾကသည္။ မီးေလာင္ျခင္းကို ႀကိဳသိႏိုင္ခ်ိန္ႏွင့္ ေဘးလြတ္ရာသို႔ ေကာင္းစြာ ေရာက္ႏိုင္ရန္ ၾကာခ်ိန္သည္ fire alarm system ႏွင့္ FPS မ်ား အားလုံး၏ အရည္အေသြးကို သတ္မွတ္ေပးသည္။

            Life safety applications ၏ အဓိက ရည္ရြယ္ခ်က္မွာ အေဆာက္အဦအတြင္းရွိ ေနသူမ်ား မီးေဘး လြတ္ရာသို႔ ေရာက္ရွိရန္ လုံေလာက္ သည့္ အခ်ိန္ရရွိေစရန္ ျဖစ္သည္။

            (property protection) ဒီဇိုင္းျပဳလုပ္ရာတြင္ မီးသတ္သမားမ်ားေရာက္ရန္ ၾကာခ်ိန္(response time of the fire depart-ent_ သူတို႔၏ မီးသတ္ႏိုင္စြမ္း(capabilities) ကို ထည့္သြင္းစဥ္းစားရန္လိုအပ္သည္။ An ex¬tended response time allows the fire to grow to a size beyond the capabilities of the dire depart¬ ment to control and extinguish the fire before a major loss occurs. Similar consideration should be given to the availability and condition of the water supply. If the water supply is questionable or inadequate, the fire department will likely have to "bring the water with them" in order to suppress  the firer. fire alarm system မ်ားသည္ မီးစတင္ေလာင္ခ်ိန္ သို႔မဟုတ္ အစပ်ဳိးခ်ိန္တြင္ detect လုပ္ႏိုင္မွသာ မီးသတ္သမားမ်ား လာရန္ အခ်ိန္ေကာင္းစြာ ရရွိႏိုင္လိမ့္မည္။ သို႔မွသာ မီးေတာက္ အားမေကာင္းခင္ ႀကိဳတင္၍ မီးကိုေကာင္းစြာ ၿငိမ္းသတ္ႏိုင္လိမ့္မည္။

Detector Selection

            Fire alarm system ဒီဇိုင္းတြင္ detector အမ်ဳိးအစားကို ေရြးခ်ယ္ၾကသည္။ consideration must be given to the types of detection that will meet (ovner's fire protection goals ႏွင့္ the system design goals ကို အေျခခံ၍) detector's မ်ား၏ operating characteristics detector မ်ား တပ္ဆင္ထားရာေနရာ၏ အေျခအေန (environmental conditions) ေလာင္ကြ်မ္းမည့္ ပစၥည္းအမ်ဳိးအစား(type of combustible material) ႏွင့္ မ်က္ႏွာၾကက္အျမင့္(ceiling height) စသည္တို႔သည္ detector မ်ား၏ စြမ္းရည္မ်ား၊ ဝိေသသအခ်က္မ်ား ျဖစ္ သည္။ NFPA 72-2010 မွ အခန္း 17.5.3 တြင္ ေဖာ္ျပထားေသာ ကာကြယ္ႏိုင္သည့္အဆင့္(concept of level of coverage) ႏွစ္မ်ဳိးရွိသည္။

 

 

(က) Total (Complete) Coverage

 

အေဆာက္အဦတစ္ခုလုံးအား ေနရာလပ္မရွိေအာင္ ကာကြယ္ထားျခင္း

Where required by laws, codes, or standards, and unless otherwise modified by 17.5.3.1.1 through 17.5.3.1.5၊ total coverage shall include all rooms, halls, storage areas, base¬ments, attics, lofts, spaces above suspended ceilings, and other subdivisions and accessi¬ble spaces, as well as the inside of all closets, elevator shafts, enclosed stairways, dumb¬waiter shafts, and chutes.

 

(ခ) Partial Coverage or Selective Area Coverage      (ေရြးခ်ယ္ထားသည့္ ေနရာအခ်ဳိ႕ကိုသာ ကာကြယ္ထားျခင္း)

 

ေရြးခ်ယ္ထားသည့္ ေနရာအခ်ဳိ႕တြင္သာ သတ္မွတ္ထားသည့္ စည္းမ်ဥ္းမ်ားအတိုင္း ကာကြယ္ျခင္း (Protection) ျပဳလုပ္ေပးရန္ Code? standare ႏွင့္ ဥပေဒ(law) မ်ားက ေဖာ္ျပေပးသည္။ As stated above, the major¬ity of fire detection systems that are installed are partial. The coverage of the detectors still may cover most areas below the ceilings, but may not be in spaces such as closets, underneath stairs and similar locations.

                        Selective coverage is where a specific hazard within a room or space is being covered, but other spaces are not. With partial and selective coverage, the prescriptive coverage requirements of the Code still must be followed for the spaces or areas that are to have detection.

(ဂ) Non-required Coverage (ကာကြယ္ရန္မလိုအပ္ျခင္း)

 

Detection installed for reasons of achiev¬ing specific fire safety objectives, but not required by any laws, codes, or standards, shall meet all of the requirements of this Code, with the exception of the prescriptive spacing criteria of Chapter 17.

                       

 

            detector application guide ကို Table 2.1 တြင္ ေဖာ္ျပထားသည္။ This guide ကို Chapter 17 of the National Fire Alarm and Signaling Code-2010 edition ႏွင့္တြဲ၍ အသုံးျပဳသင့္သည္။

                        Auto Fire Alarm System ကို အထိေရာက္ဆုံးႏွင့္ စိတ္အခ်ရဆုံး

                        Two major factors that impact the effectiveness and reliability of automatic fire detector opera-tion are ျဖစ္ေစရန္အတြက္ သတိျပဳရမည့္ အခ်က္ႏွစ္ခ်က္မွာ (၁) ceiling height ႏွင့္ (၂) detector spacing တို႔ ျဖစ္သည္။      

           

Ceiling Height

            အကယ္၍ မ်က္ႏွာၾကက္အျမင့္(ceiling height)သည္ (၁၀)ေပ ေက်ာ္ပါက heat detector တပ္ဆင္ ထားမည့္ အကြာအေဝး (spacing) မ်ားကို ေလ်ွာ့ခ်ေပးရမည္။ ထိုအခ်က္ကို NFPA 72-2010, paragraph 17.6.3.5 High Ceilings တြင္ ေဖာ္ျပထားသည္။ smoldering fires မ်ားကို ႀကိဳသိရန္ မျဖစ္ႏိုင္ေပ။ spot-type smoke detectors မ်ားျဖင့္ (၁၅) ေပထက္ ပိုျမင့္သည့္ မ်က္ႏွာၾကက္မ်ားတြင္ တပ္ဆင္၍) A fire plume has an inverted cone shape; as the fire intensifies, smoke and hear rises and the cone angle narrows. The fire plume becomes almost non¬existent where there is a smoldering fire. smoldering fire အမ်ဳိးအစားမ်ားကို ႀကိဳတင္သိေအာင္ detect လုပ္ႏိုင္ရန္ အလြန္ခက္ခဲသည္။ မီးေတာက္(flame) မျဖစ္ေပၚေပ။ အပူမ်ားေၾကာင့္ မီးစမီးနမ်ား(combustion products) detector တပ္ဆင္ထားသည့္ မ်က္ႏွာၾကက္ဆီသို႔ ေရာက္ေအာင္ မတြန္းပို႔ႏိုင္ ေသာေၾကာင့္ ျဖစ္သည္။ မီးေတာက္ေလာင္မႈ အားေကာင္းခ်ိန္(fire intensifies)မွသာ မီးစမီးနမ်ား(combustion products) detector အနီးအနားသို႔ ေရာက္ရွိႏိုင္သည္။ ထိုကဲ့သို႔ မီးေတာက္အားေကာင္းခ်ိန္ကို ႀကိဳသိျခင္း(early morning) ဟု မေခၚဆိုႏိုင္ေတာ့ေပ။

Detector Spacing

            National Fire Alarm and Signaling Code (2010 edition) မွ chapter 17 တြင္ smoke detector မ်ား တပ္ဆင္ထားရမည့္ ေနရာ အကြာအေဝးႏွင့္ သက္ဆိုင္သည့္ ၫႊန္ၾကားခ်က္မ်ား(guidance for spacing and placement of smoke detectors) ကို ေဖာ္ျပထားသည္။ ေဆာက္လုပ္ေရး လုပ္ငန္းခြင္၌ ေဆာက္လုပ္ဆဲလုပ္ငန္းမ်ား မၿပီးစီးခင္ smoke detector တပ္ဆင္ထားျခင္းကို ခြင့္မျပဳေပ။

            Guidance for the spacing for all detectors ကို Chapter 17 of the National Fire Alarm and Signaling Code-2010 edition တြင္ ေဖာ္ျပထားသည္။ some detectors (heat detectors, for example) မ်ား၏ ေနရာအကြာအေဝး (spacing) dictated by the results of test conducted by Underwriters Laboratories or Factory Mutual Research Corporation. မ်ားေသာအားျဖင့္ building codes and fire authorities တို႔သည္ detector မ်ား၏ ေနရာအကြာအေဝး(spacing) ႏွင့္ ပတ္သက္လ်ွင္ NFPA 72 မွ Chapter 17 ကို ကိုးကားရန္ ၫႊန္ၾကားေလ့ ရွိသည္။ အေစာဆုံး ႀကိဳသိႏိုင္ရန္အတြက္ detector ေနရာအကြာအေဝးကို အတတ္ႏိုင္ဆုံး ေလ်ွာ့ခ်ေပးရမည္။ တစ္နည္း detector တစ္ခုႏွစ္တစ္ခု နီးကပ္စြာ တပ္ဆင္ထားရမည္း မ်က္ႏွာၾကက္တြင္ အကာအကြယ္ အတားအဆီးမ်ားရွိေနပါက ေလစီးႏႈန္း အလြန္လ်င္ျမန္ေနပါက detector မ်ားကို နီးနီးကပ္ကပ္ တပ္ဆင္ထားရန္ လိုအပ္သည္။ Detector မ်ား အနီး၌ ေလစီးႏႈန္း ျမင့္မားေနျခင္းကို အေလးေပး စဥ္းစားရမည္။ Smoke detect မ်ားကို ေလစီးေၾကာင္း၌ တပ္ဆင္ထားျခင္း မျပဳရ။ ေလထြက္ေပါက္မ်ား ေအာက္တည့္တည့္၌ တပ္ဆင္မထားရ။ (ceiling obstructions or high velocity air movement)

 

 

There are three types of fire alarm and detection systems:

        •   Non-addressable system

        •   Addressable system

        •   Hybrid System

        •   Wireless System

 

-End-

click her to Chapter-2 Basic Fire Alarm Systems